• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They do not rot or rust like aluminum and timber.

Regularly cleaning and lubricating upvc window repairs windows and doors is crucial. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good repair.

For single pane windows it can be relatively simple to replace them, and the new window will generally fit within the old frame very easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any shards fall onto the cloth rather than on the floor where they can be trampled on and cause further damage.

After the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you might be interested in a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. Over time, they can develop a variety of issues that include sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges could help fix a window that is sagging. To accomplish this, you'll have to open the window to get to the frame. Then, using an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and verify the an appropriate fit. If you're happy with the fit, tighten the screws until they stay in the right place.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loosen. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it could also be due to the handle mechanism wearing out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need close the window and then perform a test fit. The corners of the sash should align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it is important that you take action. Water leaks from windows are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be done by any competent DIYer. Depending on the severity of the issue is, the old caulking may have to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and reduce your energy efficiency.

Make sure that the drainage holes do not have debris in them and that the sill pan has been properly angled to drain away from the window. In more serious situations, you may have to replace the window.

Mold spots and rotted sills are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage occurs between the double glazed window repairs near me-glazed window, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it blows open with an ease. They can be easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. Changing a window hinge is essentially a simple procedure, but it is simpler when you have a person to help you hold the frame up.

Check that the uPVC hinges are open and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or due to poor installation at the factory. Sending us a photo through our website can often resolve the problem. We are more than happy to provide suggestions.

It is also important to grease the hinges regularly. Applying a light engineering lubricant to the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also lower the risk of a window sticking and prevent corrosion. It is recommended to do this once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. The hinges can also become unbalanced due to wear, causing a gap where the sash meets frame. They can be repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to get them re-aligned or replaced. Second, the interlock can also become misaligned. It is located on the hinge side and may need to be cleaned. In certain instances, it may be necessary to replace them.

The next most common reason for draughts is window seals, these are prone to wear or damaged over time and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window repair near me window with glass that is low-emissivity, this will help to regulate indoor temperatures and will lessen the risk of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They will help stop cold air from entering and keep your home warm and cosy!

With a little maintenance and repair, your upvc windows will continue to provide excellent insulation and security for your home. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach the point when it's more efficient to replace them than repair them. If you have any problems with your window made of upvc it is recommended to speak with a professional as soon as possible.