• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

It can be difficult to set up the flap for your cat however, with the proper instructions it's not that hard. Firstly, determine how high you want the flap to be (on average, belly height). Mark this point on the door and then use the template provided as a guide to drill.

If you have a kitten that is still a baby, gently prop the door slightly open and encourage it to walk through. Reward the kitten each time it moves through.

Measure the Door

A cat flap is an excellent method to allow your pet to leave and come into and out of your house as it likes. This can help keep your cat healthy by ensuring that it is exercising and also being able to come back in if stuck outside in bad weather, particularly in winter. It also can reduce the amount of time you need to spend letting it in or out and can ensure your home is secure by letting you be aware of when it went out.

However, it is essential that the flap for your cat is properly fitted to stop your pet from escaping through it or be pushed through by any other animals (e.g. dogs). You should determine the height of your pet's stomach and the height of the doorway in your home to ensure that the flap is at the right height. If your cat is taller or shorter than normal, you can adjust the flap's position by moving it upwards or downwards by a small amount.

The next step is to use a spirit level to mark the center of the door, where you will put the flap. Then, using the mark as an indication, cut out the shape of the flap with the aid of a Jigsaw. Once you've cut the door, sand the edges of the door to smooth the surfaces. Then drill any fixing holes required.

The process of fitting a cat flap is not as difficult as you think, and it shouldn't take more than two hours to complete the entire task from start to finish. However, the process can be slightly more complicated in the event that you have to put it into the frame of a uPVC or composite door since these doors have various thicknesses which can affect how the holes are cut and the type of door they are inserted into. We recommend that you call an expert when this is your first time working with glass.

Measure Your cat flap insulation

You can avoid hours of ignoring the pet meow to be allowed in or out. This is especially helpful for cats that are inside during the winter months when you are at work.

It is essential to measure your cat first before you begin the installation. It might seem like a straightforward task, but it is important to measure your cat flap step correctly. Otherwise, your pet might find it difficult to use.

First, ensure that your cat is calm and not feeling stressed prior to taking the measurements. You will have to hold your cat in a place in which they cannot move. Also, make sure that the measuring tape is flat and not curved against the body. You can get an accurate measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.

Once you have the measurement of your cat, it's time to take a look at the door and decide on where to put the flap. Position the flap at the level of your cat's belly. This will allow them to pass through the door with minimal effort. This will also stop the flap from making a lot of noise as it swings back and back.

You will also need to think about the thickness and the structure of the uPVC door or composite. Although timber doors are of a similar thickness, uPVC and composite door cat flap doors are different in their overall structure and can make fitting the cat flap more difficult since you have to ensure that the hole you make is the proper size for your pet.

It is also worthwhile reading through the directions included with the cat flap kit to find a template drawing that can be used to mark out the position of the hole in the door. This will allow you to determine where the opening needs to be, and also to ensure that the template is placed correctly on the door. Utilizing a spirit level to check that the template is sitting flush against the door will also prove beneficial.

Cut the Flap

Before you can install your cat flap, you'll have to cut the door's panel to make it large enough for it. This is a difficult task and it is recommended that you seek out the assistance of an expert cat flap fitter for this step if you don't have the knowledge or skills to do it yourself. It is also recommended that you review the directions that come with the cat flap kit to find out how to do this correctly.

To do this, you have to measure the height of your cat or kitten's belly and use that as an indicator point. A good rule of thumb is to put the flap around 10-15 centimeters from the ground as this is approximately the average belly height for cats. This way, your cat will be able to move through the flap comfortably and also give other cats or snooping neighbours difficult time trying to enter or leave.

Once you have determined where the cat flap should be positioned, mark this location on the door using a pencil. If your kit comes with an outline you can place it on the door. Use the markings on the template to drill holes in each corner. After that, you'll be able cut out the template and replace it with the double glazing cat flap flap.

If you are installing your cat flap inside the form of a door made of wood or uPVC, it is possible to do it yourself if you feel confident enough to handle using a Jigsaw. Be sure not to cut through the mullions or rails that run vertically of your door. You can use a jigsaw to cut your panel into a square or a circle depending on the way you'd like to cut it. Make sure to take your time and don't try to force the jigsaw to cut faster.

After the hole has been made, carefully place the cat flap in its new place of residence. Make sure that it is securely secured. If it features caps on the screws, then place these caps onto the protruding screws. Once the screws are in place, sand any rough edges of the cut, and then seal any gaps to ensure that there aren't any draughts getting into your home.

Fit the Flap

If you have a basic cat flap installation near me flap you can open it and encourage your pet to go through by putting a little bit of cat food in the front of the door. Alternatively you can try pushing the cat through using your hands or with a stick. Once your cat is accustomed to walking through the flap it will be able to move in and out as it pleases so you can let it in or out without having to be there holding the door open for it all day (and potentially in any weather).

It is possible to fit an animal flap inside an UPVC or glass door however it's not exactly the same as fitting one into a wood external door because the UPVC doors and some glass doors aren't a uniform thickness. This could have a significant impact on the way you cut the flap hole and also how well the flap fits after installation.

The mounting kit might contain a template that outlines where to drill holes. If the kit does not include an example, you can photocopy it to create your own. When cutting, it is important to avoid pushing the jigsaw too to the point that you create a bigger hole than is necessary in your door.

Most cat flaps are rectangular or square in shape, but there are also some which are circular, and they are usually more difficult to fit. If you have a circular flap it's essential to make sure the hole is in the proper position on your door, because if it's not, the cat can't use it and could be left in the open all day (or even night).

Certain models of cat flaps have locks that let you control the time your cat comes and goes. This is useful when your cat is scared of leaving in the dark or coming back to the house at night. They can also be helpful when you are working all day. The lock can be used to allow or deny entry, and some locks can be locked in both directions, which allows you to close the door completely, which is especially beneficial for sick or elderly cats who aren't keen on going out in the rain.