• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to go inside and out at their own pace, without needing to let them in or out. They also help prevent your cat from toileting in the house.

Installing a cat flap into a upvc door panel is a lot easier than glass doors, however it does require some skills and the proper tools.

Take a measurement of the door

The installation of a cat flap inside the door isn't easy but as long as you choose the right type of cat flap be patient and follow the instructions provided it should not prove to be too difficult. We will be showing how to trace the shape, then use the jigsaw to slice the area in the door and then finish the job by securing the flap to the door. This will ensure that the flap remains in place and protects the door from wind and rain damaging the door.

The first thing you need to do is take a measurement of the width of your pet to get an accurate measurement of what size of cat flap cost flap you'll require. This will enable you to choose a cat flap that is big enough for your pet to go into the house and exit without having to open the door each time.

Once you have the measurements, you can determine where on the door the template should be placed, usually this is done with an X. However, some kits come with drawings that show where to drill. If yours does then stick it to the door and draw a line around it. If your door has a sill or moulding at the bottom, make sure you leave plenty of space between your cat and these elements.

Set a square to make sure you're cutting correctly and to make sure the hole is in a rectangle shape. When you are satisfied with this, you can begin to remove the remaining door material. If you own a set square then make use of it to verify that you're cutting properly and to ensure that the hole is a proper rectangle shape, once you are happy with this you can begin to remove the rest of the door material.

Draw a Line

The cat flap lets you to let your pet in and outside without worrying about unwanted visitors or unwelcome gifts. It also reduces drafts and helps to keep the temperature of your home steady. However, fitting a cat flap the cat flap to your door can seem like an intimidating task for those who have never done it before, which is why many people to call a professional joiner or carpenter to do the job instead. While this is definitely an option, it is possible to do the work yourself if you have the right tools and follow the instructions with care.

Although this is much simpler to accomplish with a wooden door, it is still possible to do this in uPVC doors, but you must be cautious not to damage the doors as this will cause damage to your warranty. First, you must take measurements of the door to make sure it will accommodate the new cat-flap. This should be simple enough if you are using the standard uPVC door, but you may require more care if using an alternative kind of door, as they are more difficult to cut into than solid uPVC panels.

The next step is to determine the height of your cat's stomach. This is the height from the floor to the underside of the cat's stomach and you'll need find a place on the door where this measurement is within the range your pet can comfortably go through. Once you have this information you'll need to mark out the area with pencil and a spirit level so that you can be certain that the hole you will create will fit your cat.

Once you have marked out the area, it is time to cut out the hole. It is essential to take your time and use a jigsaw in order to ensure that the cuts are smooth and clean not uneven and rough. This could cause damage to your door. Wear safety glasses and a dust mask when using the Jigsaw. Inhaling sawdust is hazardous for your health. After you've finished the cutting, you'll have to smooth out the edges of the hole with sandpaper, so that the cat flap will fit easily.

Cut a hole

Installing a cat flap into an existing door panel or double glazing sealed unit can be difficult. It is tempting to tackle the job yourself, but unless you have plenty of expertise in DIY, it's recommended to hire a professional to do the task for you. A mistake could not only look ugly but also pose a security threat. It could allow cold air to enter when the cat flap in upvc door panel is outdoors and hot air to escape when it is inside.

The hole's location should be marked on the door with the help of a pencil and a spirit level. This will ensure it is correctly positioned and is flush with the door's other parts. Make sure you have an sandpaper piece on hand for any rough edges.

Wear any safety gear you'll need to use a power tool. If you're worried about noise, you can buy an electric jigsaw that is quieter and more user-friendly.

It is crucial to only remove the material needed for the fitment of the cat flap cover for winter flap. It is essential to leave some extra material to make the wall thickness of the flap. However cutting away too much could cause issues or even damage the door frame.

A door made of upvc could contain a metal frame or panel within it that will interfere with the microchip cat flap if this is the case, you will need to cut an over-sized hole to ensure that the metal doesn't get in contact with the wall of the cat flap, if this is the case, it is essential to fill in the oversize gap and make it watertight.

If you want to install a cat flap into a double-glazed or upvc window with frames made of metal it is necessary to speak with an expert. They can offer you a brand new piece of glass with the hole already pre-made for the cat flap. It is cheaper to get this done rather than to attempt to fix the cat flap onto an existing pane of glass that hasn't been designed specifically for the purpose.

Fit the Flap

Cat flaps allow your pet to come and go at their own pace, giving them the ability to unwind in the home whenever they're feeling like it. However, if you own an uPVC door, it might be difficult to install a cat flap, particularly in the absence of glass panes that could be cut to accommodate one. If you're willing to purchase and install a replacement half-glazed uPVC panel, then it's possible to install a cat flap to the doors. It's not a simple matter of cutting a hole into the door. You'll also have to take a few steps to ensure it's safe.

A composite, uPVC or GRP door panel is generally comprised of a thin plastic skin that is bonded to an insulating polystyrene base. The material is quite fragile and care should be taken when cutting into it to avoid causing damage. This kind of door typically has a template that you can use as a guide to cut the hole into the door.

After you've marked the position of the hole in your door, it's time to fit the cat flap. You can buy and fit many different models that range from simple push-button operated ones to ones that are activated by microchips that allow only your pet. Whatever kind of cat flap you pick it's essential that your cat is able to use the flap comfortably without getting caught in the rain.

It's a good idea to choose circular fittings instead of one that is square, since circles can be more securely cut into the door glass. It's because square holes are more likely to crack the glass when they are drilled. This is also a safer choice because you won't need to drill into the toughened glass which could break and cause harm to your pet or family members. This is especially crucial if you have a young or elderly person in your home who may be injured by shards glass.