• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They do not get rotten or rusty like aluminum and timber.

It is important to clean and oil UPVC windows and doors regularly. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good repair.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However, if windows with double panes are anchored by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this instance it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning attempt to remove the window panes yourself, it is essential to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you start working on the glass so that any shards will fall onto the fabric rather than on the floor where they could be trodden under and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional comes out and fix the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the distance between the door and the window is large, you might prefer an alarm system that has an opening. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. As time passes, they may develop a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act as soon as you discover that your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window repair that is sagging. First, you'll need to unblock the windows so you can get at the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, shut your window and check for an appropriate fit. If you're satisfied with the size of the window, you can tighten screws to hold them in place.

If you are unable to move the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Most often, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. Luckily, it's not difficult to repair double glazing the loose uPVC window handle yourself. You'll first need to close the window and do an experiment fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's important to take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the issue the old caulking may require removal before a new layer can be put on. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double glazing window repairs-glazed glass, it is more likely the problem is with the seal than the frame. It is also possible to be fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it blows open with the breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical part hinges will wear out over time. Changing a window hinge is essentially a very simple process, but it's easier when you have a person to assist in holding the frame in place.

Check that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should open.

Faulty window hinges could be the result of incorrectly opening the window in a particular manner or because of poor installation at the factory. This can often be resolved by sending us a picture via our website and we will be happy to give you advice.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window sticking and prevent corrosion. It is recommended to do this once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. The hinges can also become unbalanced due to wear, causing a gap where the sash meets frame. If they're beyond repair double glazing, it may be required to realign them. Secondly the interlock, this is located on the hinge side of the window and can also be misaligned, and again it may be feasible to give them a thorough clean, however in some instances it could be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures and decrease the risk of draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. These will keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security to your home with regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and there may come a point where it is more economical to replace them than fix them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional immediately.