• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to go inside and out whenever they want without having to let them in or out. They also can help stop your cat from urinating in the home.

Installing a cat flap installer flap into the door panel made of upvc is a lot easier than glass doors, however it requires some knowledge and the appropriate tools.

Take a measurement of the door

The installation of a cat flap inside the door isn't easy however, as long as you use the correct type of cat flap make sure you take your time and follow the directions provided, it should not prove to be too much trouble. We will be showing you how to draw the shape, using a jigsaw to cut out the door's opening and then finish the job by fixing the cat flap cost flap to the door. This will ensure that the flap stays in place and protects the door from wind and rain damaging the door.

The first thing you need to do is take a measurement of the width of your pet to determine an accurate estimate of what size of cat flap you will need. This will allow you to select a cat flap fitting flap that is large enough to allow your pet to enter the home and exit without having to open the door each time.

If your kit comes with an illustration of the location to drill then you can stick it on the door, and then use a pencil around it. If your door has a sill or moulding along the bottom edge then make sure you have enough space because this will ensure your cat's safety and stop them from gaining access to your home.

Then put on your eye protection as well as a dust mask, and using a jigsaw start to cut according to the lines you've drawn in, but don't press the blade too hard, as this can cause it to cut faster than you would like it to. Use a set square to ensure that you are cutting the material properly and that the cut is a rectangle. When you are happy with the result, you can remove the remaining door material.

Draw a Line

The cat flap lets you to let your pet go inside and out without having to worry about unwanted visitors or unwelcome gifts. It also helps prevent draughts and helps keep your home's temperature in check. However, putting a cat flap in your door can seem like an intimidating task for those who've never done it before, leading many people to seek out a professional carpenter or joiner to do the job instead. It is an option, but you can do it yourself if the tools are in order and the instructions are adhered to.

This is much simpler to do with doors made of wood, however it is still possible using uPVC. However you should be cautious not to scratch the doors because this will cause the door to be damaged and invalidate your warranty. The first step in the process is to measure the door, ensuring that it is able to accommodate the new cat flap. If you have a standard uPVC panel, this should be easy. However, if your door is made of composite or another kind of door, you might need to be more careful.

The next step is to measure the height of your cat's stomach. This is the height from the floor to the underside of the cat's stomach and you'll need to locate a place near the door where this measurement will fall within the range your cat can comfortably pass through. Once you know this you'll have to draw the area with an eraser and a spirit level to be certain that the hole you will make will be a good fit for your cat.

Once you've marked the area, it is time to make the hole. It is important to take your time and use a jigsaw ensure that the cuts are clean and smooth not uneven and rough. This could cause damage to your door. Wear safety glasses and a dust mask when using a jigsaw. Inhaling sawdust is dangerous for your health. After you've completed the cutting process, you will need to smooth out the edges of the hole using sandpaper, so that your cat flap can be fitted easily into place.

Cut a hole

Installing a cat flap into an existing door panel or double glazing sealed unit can be difficult. If you're not skilled in DIY, it is best to hire an expert to do the job for you. A botched job could not only be ugly and unattractive, but could also be an security risk. It could allow cold air to enter when the cat is outdoors and hot air to escape when inside.

Mark the hole position on the door with the help of a pencil and a spirit level. This will ensure that it is positioned correctly and aligns with the rest of the door. Make sure you have sandpaper on hand to smooth any rough edges.

Wear the safety equipment you need to work with the power tool. If you're worried about the noise, you can get a cordless jigsaw which is quieter and easier.

It is best to only remove the material needed to create the flap. It is essential to leave a bit of material for the wall thickness of the cat flap. However cutting away too much could cause issues or even damage the frame of the door.

A door made of upvc could have a metal frame or panel within it which could block the microchip cat flap and if this is the case, you will need to cut an oversize hole to ensure the metal does not touch the wall of the cat flap, if this is done it is important to fill in the oversize gap and seal it with water.

If you're planning to install an animal flap to a upvc door or double-glazed window with a frame made of metal, you'll need to talk to a specialist who can supply you with a new pane of glass that already has the hole for the cat flap already drilled inside. It is cheaper to have this done instead of trying to install the flap to an existing pane of glass that has not been manufactured specifically for this purpose.

Install the Flap

cat Flap in upvc door panel flaps allow your pet the freedom to come and go whenever they want and allow them to be comfortable in the home whenever they like. If you've got a uPVC door, it might be difficult to install an animal flap, especially if you don't own glass panes that can be cut to fit one. If you're willing to purchase and install a new half-glazed uPVC panel then it is possible to install the cat flap to the doors. It's not as simple as simply making a hole in the door, however there are a few things you'll need first to ensure it's secure.

A composite door panel usually has an extremely thin plastic outer skin that is bonded to a soft, polystyrene insulating core. It is essential to be careful when cutting the material. This kind of door typically has a template that you can use as a reference to cut the hole in the door.

Once you have marked the location of the hole in your door, now it's time to install the flap. You can pick from a range of models, ranging from simple push-button units to microchip-activated ones that allow only your pet to enter. No matter which type of cat flaps you choose it's essential that your cat is able to utilize the flap with ease without getting stuck in the rain.

A circular fitting is more effective than a square one, as circles can be cut more securely into glass. This is because square holes can make glass more vulnerable to cracking when drilling is applied to it. This is also a safer option, as you won't have to drill into the toughened glass, which could shatter and harm your pet or family. This is particularly important if there are children or elderly people in your home who could be injured by glass shards.